AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISC 316
(1989) ASD Manual of Steel Construction
AMERICAN WELDING SOCIETY (AWS)
AWS D1.1/D1.1M
(2004) Structural Welding Code - Steel
ASTM INTERNATIONAL (ASTM)
ASTM A 366/A 366M
(1997e1) Commercial Steel, Sheet,
Carbon,(0.15 Maximum Percent Cold-Rolled
ASTM A 568/A 568M
(2004) Steel, Sheet, Carbon, and
High-Strength, Low-Alloy, Hot-Rolled and
Cold-Rolled, General Requirements for
ASTM B 194
(2001e1) Copper-Beryllium Alloy Plate,
Sheet, Strip, and Rolled Bar
ASTM E 90
(2004) Laboratory Measurement of Airborne
Sound Transmission Loss of Building
Partitions and Elements
ASTM F 1066
(2004) Vinyl Composition Floor Tile
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE Std 299
(1997) Standard Method for Measuring the
Effectiveness of Electromagnetic Shielding
Enclosures
INTERNATIONAL CONFERENCE OF BUILDING OFFICIALS (ICBO)
ICBO UBC
(2000) Uniform Building Code (3 Vol.)
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-F-15733
(Rev H; Supp 1) Filters and Capacitors,
Radio Frequency Interference
MIL-STD-220
(Rev B) Method of Insertion-Loss
Measurement
MIL-STD-461
(Rev E) Requirements for the Control of
Characteristics of Subsystems and Equipment
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
FS A-A-50032
(Rev B) Fans, Ventilating, Propeller
1.2
GENERAL REQUIREMENTS
**************************************************************************
SECTION 13094N
Page 5
Previous Page
