Perform an operational test on each unit after installation and adjustment.
Operate unit long enough at the required control setting to determine that
refrigeration, defrost, and control systems operate and cycle properly.
3.3
SCHEDULE
Metric measurements in this section are based on mathematical conversion of
English unit measurement, and not on metric measurement commonly agreed to
by the manufacturers or other parties. The English and metric units for
the measurements shown are as follows:
Products
English Units
Metric Units
Stainless steel legs
4 inches
100 mm
Stainless Steel
12
gage
2.5
mm
14
gage
1.8
mm
16
gage
1.5
mm
18
gage
1.2
mm
Channels
one x one inch
25 x 25 mm
12 gage
2.5 mm
Angles
1 1/2 x 1 1/2 x 1/8 inch
38 x 38 x 3 mm
-- End of Section --
SECTION 11400N
Page 37
Previous Page
