notified 24 hours in advance of tests and the tests shall be
performed at the work site if practicable.
SD-06 Test Reports
Field Tests and Inspections[; G][; G, [_____]]
Upon completion and testing of the installed system, test
reports shall be submitted in booklet form showing all field tests
performed to adjust each component and all field tests performed
to prove compliance with the specified performance criteria. Each
test report shall indicate the final position of controls.
SD-10 Operation and Maintenance Data
Operating and Maintenance Instructions[; G][; G, [_____]]
[Six] [_____] copies of operating instructions outlining the
step-by-step procedures required for system startup, operation and
shutdown. [Six] [_____] copies of maintenance instructions
listing routine maintenance procedures, possible breakdowns and
repairs, and troubleshooting guides.
1.4
OPERATING AND MAINTENANCE INSTRUCTIONS
The contractor shall furnish instructions including the manufacturer's
name, model number, service manual, parts list, and brief description of
all equipment and their basic operating features. Each set shall be
permanently bound and shall have a hard cover. The following
identification shall be inscribed on the covers: the words "OPERATING AND
MAINTENANCE INSTRUCTIONS," name and location of the facility, name of the
Contractor, and contract number. Instructions shall include, but not be
limited to, the following:
a.
System layout showing piping, valves, and controls.
b.
Approved wiring and control diagrams.
c.
A control sequence describing startup, operation, and shutdown.
d.
Operating and maintenance instructions for each piece of
equipment, including lubrication instructions and troubleshooting
guide.
e.
Manufacturer's bulletins, cut sheets and descriptive data, parts
lists, and recommended spare parts.
f.
Simplified diagrams for the system as installed.
1.5
DELIVERY AND STORAGE
Equipment in storage shall be stored protected from damage, deterioration,
weather, humidity and temperature variations, dirt and dust, or other
contaminants as required by the manufacturer.
1.6
SPARE PARTS
The Contractor shall submit spare parts data for all materials and for each
different item of equipment specified, after approval of the detail
SECTION 11391
Page 11
Previous Page
