District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Treatment System Installation[; G][; G, [_____]]
Drawings shall contain complete wiring and schematic diagrams;
equipment layout and anchorage; and any other details required to
demonstrate that the system has been coordinated and will properly
function as a unit. Drawings shall show proposed layout and
anchorage of equipment and appurtenances and equipment
relationship to other parts of the work including clearances
required for maintenance and operation. Piecemeal submittals will
not be accepted.
SD-03 Product Data
Materials[; G][; G, [_____]]
A complete list of equipment and materials, including
manufacturer's descriptive and technical literature; performance
charts and curves; catalog cuts; installation instructions; and a
recommendation on quantities of spare parts to have on hand at all
times for each piece of equipment.
Spare Parts[; G][; G, [_____]]
Spare parts data for all materials and for each different item
of equipment supplied.
Framed Instructions[; G][; G, [_____]]
Manufacturer's Written Instructions[; G][; G, [_____]]
Proposed diagrams, instructions, and other sheets, prior to
Welding
A copy of qualified procedures and a list of names and
identification symbols of qualified welders and welding operators.
Welding procedures qualified by others, and welders and welding
operators qualified by another employer may be accepted as
permitted by ASME B31.1. The Contracting Officer shall be
SECTION 11391
Page 10
Previous Page
