SSPC SP 6
(2000) Commercial Blast Cleaning
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-E-24635
(Rev C) Enamel, Silicone Alkyd Copolymer
(Metric)
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
FS TT-E-1593
(Rev B) Enamel, Silicone Alkyd Copolymer,
Gloss (For Exterior and Interior Use)
FS TT-P-645
(Rev B) Primer, Paint, Zinc-Molybdate,
Alkyd Type
FS TT-P-95
(Rev C; Am. 1) Paint, Rubber: For
Swimming Pools and Other Concrete and
Masonry Surfaces
U.S. NAVAL FACILITIES ENGINEERING COMMAND (NAVFAC)
NAVFAC P-355
(1992) Seismic Design for Buildings
1.2
DEFINITION
a.
Year 2000 compliant - means computer controlled facility
components that accurately process date and time data (including,
but not limited to, calculating, comparing, and sequencing) from,
into, and between the twentieth and twenty-first centuries, and
the years 1999 and 2000 and leap year calculations.
1.3
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
SECTION 11375N
Page 12
Previous Page
