Extruded Bars, Rods, Wire, Profiles, and
Tubes
ASTM B 221M
(2004) Aluminum and Aluminum-Alloy
Extruded Bars, Rods, Wire, Profiles, and
Tubes (Metric)
ASTM B 584
(2004) Copper Alloy Sand Castings for
General Applications
ASTM B 62
(2002) Composition Bronze or Ounce Metal
Castings
ASTM B 88
(2003) Seamless Copper Water Tube
ASTM B 88M
(2003) Seamless Copper Water Tube (Metric)
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-70
(1998) Cast Iron Gate Valves, Flanged and
Threaded Ends
MSS SP-72
(1999) Ball Valves with Flanged or
Butt-Welding Ends for General Service
MSS SP-78
(1998) Cast Iron Plug Valves, Flanged and
Threaded Ends
MSS SP-80
(2003) Bronze Gate, Globe, Angle and Check
Valves
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA ICS 1
(2000) Industrial Control and Systems:
General Requirements
NEMA MG 1
(2003; R 2004) Motors and Generators
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
REDWOOD INSPECTION SERVICE (RIS) OF THE CALIFORNIA REDWOOD
ASSOCIATION (CRA)
RIS Grade Use
(1998) Redwood Lumber Grades and Uses
THE SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SSPC PS 10.01
(1982; R 2000) Hot-Applied Coal Tar Enamel
Painting System
SSPC PS 4.02
(1982; R 2000) Four-Coat Vinyl Painting
System (For Fresh Water, Chemical, and
Corrosive Atmospheres)
SSPC Paint 16
(1982; R 2000) Coal Tar Epoxy-Polyamide
Black (or Dark Red) Paint
SECTION 11375N
Page 11
Previous Page
