projects on existing facilities.
This section covers some of the more common exterior
sign types. When other sign types are to be used,
specifications will be modified accordingly.
Product selections shall be based on aesthetic
values, appearance, and cost as related to project
needs.
Additional Guidance on the development of signage
systems is available in USACE EP 310-1-6a and 6b,
Sign Standards Manual. The document is available
from the USACE Publications Depot, 2803 52nd Avenue,
Hyattsville, MD 20781, 301-394-0081/82/83/84.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ALUMINUM ASSOCIATION (AA)
AA DAF-45
(2003) Designation System for Aluminum
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z97.1
(1984; R 1994) Safety Glazing Materials
Used in Buildings
AMERICAN WELDING SOCIETY (AWS)
AWS C1.1M/C1.1
(2000)Resistance Welding
AWS D1.1/D1.1M
(2004) Structural Welding Code - Steel
AWS D1.2
(2003) Structural Welding Code - Aluminum
ASTM INTERNATIONAL (ASTM)
ASTM A 1011/A 1011M
(2004a) Steel, Sheet and Strip,
Hot-Rolled, Carbon, Structural, High
Strength Low-Alloy and High-Strength
Low-Alloy With Improved Formability
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
SECTION 10430
Page 4
Previous Page
