2.7
FINISH
2.7.1
Aluminum Finish
**************************************************************************
NOTE: On small projects, specify finish of aluminum
by using description and not the Aluminum
Association designations.
**************************************************************************
Finish for aluminum shall be in accordance with AA DAF-45. Exposed
aluminum shall be designation [[AA-C22A31] [_____] chemically etched medium
matte, with clear anodic coating] [[AA-C22A32] [_____] chemically etched
medium matte with integrally colored anodic coating] class II architectural
coating 0.010 mm 0.4 mil thick. Concealed aluminum shall be mill finish as
fabricated, uniform in natural color and free from surface blemishes.
2.7.2
Stainless Steel Finish
Finish for stainless steel shall be in accordance with [ASTM A 167, Type
302 or 304] [NAAMM MFM], finish number 4.
2.7.3
Resilient Material Finish
**************************************************************************
NOTE: Coordinate resilient finishes with
manufacturers. Certain finishes and textures are
not available from some manufacturers.
**************************************************************************
Finish for resilient material shall be [embossed [velour] [stipple]
[_____]] [[fake woodgrain] [high gloss vinyl]] texture with colors in
accordance with SAE J1545.
2.8
ADHESIVES
Adhesive for resilient material shall be in accordance with manufacturers
recommendations.
2.9
COLOR
**************************************************************************
NOTE: Editing of color reference sentence(s) shall
be coordinated with the Government. Generally the
09915 COLOR SCHEDULE or drawing is used when the
project is designed by an Architect or Interior
designer. Color shall be selected from
manufacturers standard colors or identified as a
manufacturers color in this specification only when
the project is very simple and has minimal finishes.
When the Government directs that color be located in
the drawings a note shall be added that states:
"Where color is shown as being specific to one
manufacturer, an equivalent color by another
manufacturer may be submitted for approval.
Manufacturers and materials specified are not
intended to limit the selection of equal colors from
other manufacturers. The word "color" as used
SECTION 10260
Page 10
Previous Page
