inspected, and repaired, prior to coating. That
requirement is not included in this specification,
and if required for a repair project, it should be
included in the structural repair Section of the
project specification. Tailor the requirement to
the needs of cleaning that will be required in
preparation for repairs, and note that the abrasive
blasting for inspection should be accomplished in
such a manner that it does not conflict with any
surface condition requirements in this Section. For
repair projects, specify appropriate portions of the
steel surfacing requirements (according to NACE
RP0178) from Section 13209 WATER STORAGE STEEL TANKS.
**************************************************************************
**************************************************************************
NOTE: Designers are encouraged to contact J. H.
Brandon, LANTNAVFACENGCOM 1613G, 757 322-4645,
brandonjh@efdlant.navfac.navy.mil prior to beginning
a new Navy design.
**************************************************************************
**************************************************************************
NOTE: Designers are encouraged to contact the Air
Force Civil Engineering Corrosion Program Manager at
HQ AFCESA/CESM, 139 Barnes Drive, Ste 1, Tyndall
AFB, FL 32403, Tel 850-283-6217, prior to beginning
new Air Force design.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM D 3276
(2000) Painting Inspectors (Metal
Substrates)
ASTM D 3925
(2002) Sampling Liquid Paints and Related
Pigmented Coatings
ASTM D 4285
(1983; R 1999) Indicating Oil or Water in
Compressed Air
ASTM D 4417
(2003) Field Measurement of Surface
Profile of Blast Cleaned Steel
SECTION 09972
Page 6
Previous Page
