"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-03 Product Data
Cementitious backer units
Glass Mat Water-Resistant Gypsum Tile Backing Board
Water-Resistant Gypsum Backing Board
Glass Mat Covered or Reinforced Gypsum Sheathing
Glass Mat Covered or Reinforced Gypsum Sheathing Sealant
Impact Resistant Gypsum Board
Accessories
Submit for each type of gypsum board and for cementitious backer
units.
SD-04 Samples
Predecorated gypsum board; G, [_____]
Submit for each color and pattern of predecorated gypsum board.
Where colors are not indicated, submit color selection samples of
not less than eight of the manufacturer's standard colors.
SD-07 Certificates
Asbestos Free Materials; G, [_____]
Certify that gypsum board types, gypsum backing board types,
cementitious backer units, and joint treating materials do not
contain asbestos.
1.3
DELIVERY, STORAGE, AND HANDLING
1.3.1
Delivery
Deliver materials in the original packages, containers, or bundles with
each bearing the brand name, applicable standard designation, and name of
manufacturer, or supplier.
1.3.2
Storage
Keep materials dry by storing inside a sheltered building. Where necessary
to store gypsum board and cementitious backer units outside, store off the
ground, properly supported on a level platform, and protected from direct
exposure to rain, snow, sunlight, and other extreme weather conditions.
Provide adequate ventilation to prevent condensation.
1.3.3
Handling
Neatly stack gypsum board and cementitious backer units flat to prevent
sagging or damage to the edges, ends, and surfaces.
SECTION 09250
Page 7
Previous Page
