board and cementitious backer units, using same
terminology as in the specification.
2. Locations and UL or GA design numbers for fire
rated gypsum board and cementitious backer unit
assemblies.
3. Locations of asphalt impregnated building felt
if gypsum sheathing is used or if cementitious
backer units are used in wet areas.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI A108.1
(1999) Installation of Ceramic Tile;
including A108.1A-C, 108.4-.13, 118.1-.10,
A136.1
ANSI A108.11
(1992) Interior Installation of
Cementitious Backer Units
ASTM INTERNATIONAL (ASTM)
ASTM C 1002
(2004) Steel Self-Piercing Tapping Screws
for the Application of Gypsum Panel
Products or Metal Plaster Bases to Wood
Studs or Steel Studs
ASTM C 1047
(1999; R 2004) Accessories for Gypsum
Wallboard and Gypsum Veneer Base
ASTM C 1177/C 1177M
(2004e1) Glass Mat Gypsum Substrate for
Use as Sheathing
ASTM C 1178/C 1178M
(2004e1) Glass Mat Water-Resistant Gypsum
Backing Panel
ASTM C 1396/C 1396M
(2004) Gypsum Board
ASTM C 36/C 36M
(2003e1) Gypsum Wallboard
ASTM C 442/C 442M
(2004e1) Gypsum Backing Board, Gypsum
SECTION 09250
Page 4
Previous Page
