**************************************************************************
USACE/NAVFAC/AFCESA
UFGS-09250 (November 2001)
-------------------------------
PREPARING ACTIVITY: NAVFAC
Replaces
UFGS-09250A (April 2001) and
UFGS-09250N (September 2001)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 09250
GYPSUM BOARD
11/01
**************************************************************************
NOTE: This guide specification covers the
requirements for gypsum board, cementitious backer
units, and accessories intended for use in drywall
construction.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
This guide specification includes tailoring options
for Fire-rated construction. Selection or
deselection of a tailoring option will include or
exclude that option in the section, but editing the
resulting section to fit the project is still
required.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
Reference 05400 COLD-FORMED METAL FRAMING for load
bearing studwork. Reference 09100 METAL SUPPORT
ASSEMBLIES for non-loadbearing studs, furring and
ceiling suspension systems.
**************************************************************************
**************************************************************************
NOTE: On the drawings, show:
1.
Locations of each type of gypsum board, backing
SECTION 09250
Page 3