PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 1002
(2004) Steel Self-Piercing Tapping Screws
for the Application of Gypsum Panel
Products or Metal Plaster Bases to Wood
Studs or Steel Studs
ASTM C 1047
(1999; R 2004) Accessories for Gypsum
Wallboard and Gypsum Veneer Base
ASTM C 36/C 36M
(2003e1) Gypsum Wallboard
ASTM C 442/C 442M
(2004e1) Gypsum Backing Board, Gypsum
Coreboard, and Gypsum Shaftliner Board
ASTM C 475/C 475M
(2002) Joint Compound and Joint Tape for
Finishing Gypsum Board
ASTM C 514
(2001) Nails for the Application of Gypsum
Board
ASTM C 587
(2002) Gypsum Veneer Plaster
ASTM C 588/C 588M
(2003e1) Gypsum Base for Veneer Plasters
ASTM C 630/C 630M
(2003e1) Water-Resistant Gypsum Backing
Board
ASTM C 631
(1995a; R 2004) Bonding Compounds for
Interior Gypsum Plastering
ASTM C 645
(2004a) Nonstructural Steel Framing Members
ASTM C 754
(2004) Installation of Steel Framing
Members to Receive Screw-Attached Gypsum
Panel Products
ASTM C 843
(1999e1) Application of Gypsum Veneer
Plaster
ASTM C 844
(2004) Application of Gypsum Base to
Receive Gypsum Veneer Plaster
SECTION 09215
Page 4
Previous Page
