PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM E 283
(2004) Determining the Rate of Air Leakage
Through Exterior Windows, Curtain Walls,
and Doors Under Specified Pressure
Differences Across the Specimen
ASTM F 883
(2004) Padlocks
BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)
BHMA A156.1
(2000) Butts and Hinges
BHMA A156.12
(1999) Interconnected Locks & Latches
BHMA A156.13
(2002) Mortise Locks & Latches, Series 1000
BHMA A156.15
(2001) Closer Holder Release Devices
BHMA A156.16
(2002) Auxiliary Hardware
BHMA A156.17
(2004) Self Closing Hinges & Pivots
BHMA A156.18
(2000) Materials and Finishes
BHMA A156.2
(2003) Bored and Preassembled Locks and
Latches
BHMA A156.21
(2001) Thresholds
BHMA A156.22
(2003) Door Gasketing and Edge Seal Systems
BHMA A156.3
(2001) Exit Devices
BHMA A156.4
(2000) Door Controls - Closers
BHMA A156.5
(2001) Auxiliary Locks & Associated
Products
BHMA A156.6
(2001) Architectural Door Trim
SECTION 08710
Page 4
Previous Page
