SECTION 08710 DOOR HARDWARE

**************************************************************************

USACE / NAVFAC / AFCESA

UFGS-08710 (February 2002)

------------------------------

Preparing Activity: NAVFAC

Superseding

UFGS-08710 (August 2001)

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated 23 June 2005

Latest change indicated by CHG tags

**************************************************************************

SECTION 08710

DOOR HARDWARE

02/02

**************************************************************************

NOTE: This guide specification covers the

requirements for finish hardware for permanent

structures.

Comments and suggestions on this guide specification

are welcome and should be directed to the technical

proponent of the specification. A listing of

technical proponents, including their organization

designation and telephone number, is on the Internet.

Recommended changes to a UFGS should be submitted as

a Criteria Change Request (CCR).

Use of electronic communication is encouraged.

Brackets are used in the text to indicate designer

choices or locations where text must be supplied by

the designer.

**************************************************************************

NOTE: All items of finish hardware necessary for

completion of the project and not specified in other

sections should be included in this section.

**************************************************************************

NOTE: On the drawings, show:

1.

Location, class, and hourly rating of fire doors;

2. Location and installation details for blocking

behind door stops (wall bumpers) mounted on

wallboard partitions; and

3. Either hardware set numbers (HW-2, etc.) in the

door schedule, or list doors by number in each

hardware set.

**************************************************************************

SECTION 08710

Page 3