District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Windows
Indicate elevations of windows, full-size sections, thicknesses
and gages of metal, fastenings, proposed method of anchoring, size
and spacing of anchors, details of construction, method of
glazing, details of operating hardware, [mullion details,] [method
and materials for weatherstripping,] [method of attachment of
screens,] [metal subframes,] [stools,] [casings,] [sills,] [trim,]
[window cleaners' bolts,] other related items, and installation
details.
SD-03 Product Data
Hardware
Fasteners
Accessories
Operators
Screens
SD-04 Samples
Color coating; G, [_____]
Submit chart of manufacturer's color coatings if factory finish
is to be provided in lieu of field painting.
Windows
Submit one complete, full size glazed window of each type
proposed for use, complete with hardware, anchors, and other
accessories. [Where screens or weatherstripping are required, fit
sample windows with such items that are to be used.] After
approval, install each sample in the work, clearly identified,
with location recorded.
SECTION 08510
Page 6
Previous Page
