ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM D 3656
(2004) Insect Screening and Louver Cloth
Woven from Vinyl-Coated Glass Yarns
ASTM E 283
(2004) Determining the Rate of Air Leakage
Through Exterior Windows, Curtain Walls,
and Doors Under Specified Pressure
Differences Across the Specimen
ASTM E 330
(2002) Structural Performance of Exterior
Windows, Doors, Skylights and Curtain
Walls by Uniform Static Air Pressure
Difference
ASTM E 331
(2000) Water Penetration of Exterior
Windows, Skylights, Doors, and Curtain
Walls by Uniform Static Air Pressure
Difference
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 101
(2003) Life Safety Code
NFPA 80
(1999) Fire Doors and Fire Windows
STEEL WINDOW INSTITUTE (SWI)
SWI SWS
(2001) Steel Window Specifications
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
SECTION 08510
Page 5
Previous Page
