Point to 4 in. (100 mm) Thick
ASTM A 606
(2004) Steel, Sheet and Strip,
High-Strength, Low-Alloy, Hot-Rolled and
Cold-Rolled, with Improved Atmospheric
ASTM A 615/A 615M
(2004b) Deformed and Plain Billet-Steel
Bars for Concrete Reinforcement
ASTM A 618
(2004) Hot-Formed Welded and Seamless
High-Strength Low-Alloy Structural Tubing
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM A 706/A 706M
(2004b) Low-Alloy Steel Deformed and Plain
Bars for Concrete Reinforcement
ASTM A 780
(2001) Repair of Damaged and Uncoated
Areas of Hot-Dipped Galvanized Coatings
ASTM A 792/A 792M
(2003) Steel Sheet, 55% Aluminum-Zinc
Alloy-Coated by the Hot-Dip Process
ASTM E 283
(2004) Determining the Rate of Air Leakage
Through Exterior Windows, Curtain Walls,
and Doors Under Specified Pressure
Differences Across the Specimen
ASTM E 90
(2004) Laboratory Measurement of Airborne
Sound Transmission Loss of Building
Partitions and Elements
ASTM F 436
(2004) Hardened Steel Washers
ASTM F 436M
(2004) Hardened Steel Washers (Metric)
ASTM F 568M
(2004) Carbon and Alloy Steel Externally
Threaded Metric Fasteners
ASTM F 835
(2004) Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws
ASTM F 835M
(2004) Alloy Steel Socket Button and Flat
Countersunk Head Cap Screws (Metric)
ASTM F 883
(2004) Padlocks
BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)
BHMA A156.13
(2002) Mortise Locks & Latches, Series 1000
BHMA A156.20
(2001) Strap and Tee Hinges and Hasps
BHMA A156.3
(2001) Exit Devices
BHMA A156.4
(2000) Door Controls - Closers
SECTION 08390
Page 7
Previous Page
