shall permit easy access for inspection and handling.
Remove damaged items
and provide new.
PART 2
PRODUCTS
2.1
MATERIALS
2.1.1
Hard-Drawn Springwire
ASTM A 227/A 227M.
2.1.2
Oil-Tempered Springwire
ASTM A 229/A 229M.
2.1.3
Steel Sheet
ASTM A 653/A 653M.
2.1.4
Steel Shapes
ASTM A 36/A 36M.
2.1.5
Aluminum Extrusions
ASTM B 221MASTM B 221,
Alloy 6063-T5.
2.1.6
Aluminum Sheets and Strips
ASTM B 209MASTM B 209,
alloy and temper best suited for the purpose.
2.1.7
Glass
Fully tempered, clear float glass [3] [1/8] [_____] mm inchthick.
2.2
DOORS
**************************************************************************
NOTE: DASMA 102 designates doors as follows:
Residential. Intended for use in residential
garage, normally operated less than 1,500 cycles per
year.
Commercial. Intended for vehicular use at entrances
of commercial buildings such as loading docks and
service stations, normally operated less than 5,000
cycles per year.
Industrial. Intended for vehicular use at entrances
of parking garages, factories, and manufacturing
plants, normally operated in excess of 5,000 cycles
per year.
If profile is indicated and there is a requirement
for matching, add "Profile of panels shall match
profile indicated."
**************************************************************************
SECTION 08361
Page 7
Previous Page
