designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Doors; G, [_____]
Show types, sizes, locations, metal gages including minimum
metal decimal thickness, hardware provisions, installation
details, and other details of construction. [For
electrically-operated doors, include supporting brackets for
motors, location, type, and ratings of motors, switches, and
safety devices.]
SD-03 Product Data
Doors; G, [_____]
[
Electric operators; G, [_____]]
[
For electrically motor-operated doors, submit manufacturer's
wiring diagrams for motor and controls.]
SD-08 Manufacturer's Instructions
Doors
SD-10 Operation and Maintenance Data
Doors, Data Package 2; G, [_____]
Submit in accordance with Section 01781 OPERATION AND
MAINTENANCE DATA.
1.3
DELIVERY, STORAGE, AND HANDLING
Protect doors and accessories from damage during delivery, storage, and
handling. Clearly mark manufacturer's brand name. Store doors in dry
locations with adequate ventilation, free from dust and water. Storage
SECTION 08361
Page 6
Previous Page
