NOTE: When weatherstripping is specified in Section
08710, "Finish Hardware", delete the bracketed item
"Weatherstripping".
**************************************************************************
SD-02 Shop Drawings
Doors; G, [_____]
Frames; G, [_____]
Accessories
[
Weatherstripping]
Show elevations, construction details, metal gages, hardware
provisions, method of glazing, and installation details.
Schedules; G, [_____]
**************************************************************************
NOTE: When weatherstripping is specified in Section
08710 FINISH HARDWARE, delete the bracketed item
"Weatherstripping".
**************************************************************************
SD-03 Product Data
Doors; G, [_____]
Frames; G, [_____]
Accessories
[
Weatherstripping]
Submit manufacturer's descriptive literature for doors, frames,
and accessories. Include data and details on door construction,
panel (internal) reinforcement, insulation, and door edge
construction. When "custom hollow metal doors" are provided in
lieu of "standard steel doors," provide additional details and
data sufficient for comparison to SDI A250.8 requirements.
[
SD-04 Samples
Factory-applied enamel finish; G, [_____]
Where colors are not indicated, submit manufacturer's standard
colors and patterns for selection.]
1.3
DELIVERY, STORAGE, AND HANDLING
Deliver doors, frames, and accessories undamaged and with protective
wrappings or packaging. [Strap knock-down frames in bundles.] [Provide
temporary steel spreaders securely fastened to the bottom of each welded
frame.] Store doors and frames on platforms under cover in clean, dry,
ventilated, and accessible locations, with 6 mm 1/4 inch airspace between
doors. Remove damp or wet packaging immediately and wipe affected surfaces
dry. Replace damaged materials with new.
SECTION 08110
Page 7
Previous Page
