SECTION 08110 STEEL DOORS AND FRAMES

**************************************************************************

USACE / NAVFAC / AFCESA

UFGS-08110 (May 2001)

----------------------------

Preparing Activity: NAVFAC

Superseding

UFGS-08110 (March 2001)

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated 23 June 2005

Revised throughout - changes not indicated by CHG tags

**************************************************************************

SECTION 08110

STEEL DOORS AND FRAMES

05/01

**************************************************************************

NOTE: This guide specification covers the

requirements for steel doors and frames.

Comments and suggestions on this guide specification

are welcome and should be directed to the technical

proponent of the specification. A listing of

technical proponents, including their organization

designation and telephone number, is on the Internet.

Recommended changes to a UFGS should be submitted as

a Criteria Change Request (CCR).

Use of electronic communication is encouraged.

Brackets are used in the text to indicate designer

choices or locations where text must be supplied by

the designer.

**************************************************************************

NOTE: Some paragraphs may need to be supplemented

to meet project requirements.

**************************************************************************

NOTE: On the drawings, show:

1. Sizes of door openings, thicknesses of doors,

swings, and travels of doors, and design of doors,

whether flush panel, full flush, paneled, glazed, or

louvered. It is recommended that standard door-type

nomenclature, SDI 106, be used to indicate designs

(e.g., F, L, G, GL, etc., in lieu of A, B, C, etc.).

2. Details of nonstructural mullions, mullion

covers, and removable mullions.

3.

Type and thickness of glazing required; whether

SECTION 08110

Page 3