(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM A 924/A 924M
(2004) General Requirements for Steel
Sheet, Metallic-Coated by the Hot-Dip
Process
ASTM C 578
(2004) Rigid, Cellular Polystyrene Thermal
Insulation
ASTM C 59/C 59M1
(2001) Unfaced Preformed Rigid Cellular
Polyisocyanurate Thermal Insulation
ASTM C 612
(2004) Mineral Fiber Block and Board
Thermal Insulation
ASTM D 2863
(2000) Measuring the Minimum Oxygen
Concentration to Support Candle-Like
Combustion of Plastics (Oxygen Index)
ASTM E 283
(2004) Determining the Rate of Air Leakage
Through Exterior Windows, Curtain Walls,
and Doors Under Specified Pressure
Differences Across the Specimen
BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)
BHMA A115
(Complete Set - Spec dates Vary) Door and
Frame Preparation for Hardware (Incl
A115.1 (1990), A115.2 (1987), A115.4
(1994), A115.5 (1992), A115.6 (1993),
A115.12 (1994), A115.13 (1991), A115.14
(1994), A115.15 (1994), A115.16 (1990),
A115.17 (1994), A115.18 (1994)
NATIONAL ASSOCIATION OF ARCHITECTURAL METAL MANUFACTURERS (NAAMM)
NAAMM HMMA HMM
(1999; R2000) Hollow Metal Manual
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 105
(2003) Installation of Smoke Door
Assemblies
NFPA 252
(2003) Fire Tests of Door Assemblies
NFPA 80
(1999) Fire Doors and Fire Windows
STEEL DOOR INSTITUTE (SDI)
SDI 105
(2001) Recommended Erection Instructions
for Steel Frames
SDI 111-B
(2000) Recommended Standard Details for
Dutch Doors
SDI 111-C
(2000) Recommended Louver Details for
Standard Steel Doors
SECTION 08110
Page 5
Previous Page
