PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 509
(2000) Elastomeric Cellular Preformed
Gasket and Sealing Material
ASTM C 570
(2000) Oil- and Resin-Base Caulking
Compound for Building Construction
ASTM C 734
(2001) Low-Temperature Flexibility of
Latex Sealants After Artificial Weathering
ASTM C 834
(2000e1) Latex Sealants
ASTM C 919
(2002) Use of Sealants in Acoustical
Applications
ASTM C 920
(2002) Elastomeric Joint Sealants
ASTM D 1056
(2000) Flexible Cellular Materials -
Sponge or Expanded Rubber
ASTM D 1667
(1997) Flexible Cellular Materials - Vinyl
Chloride Polymers and Copolymers
(Closed-Cell Foam)
ASTM D 217
(2002) Cone Penetration of Lubricating
Grease
ASTM E 84
(2004) Surface Burning Characteristics of
Building Materials
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
SECTION 07920
Page 4