SECTION 07920 JOINT SEALANTS

**************************************************************************

USACE / NAVFAC / AFCESA

UFGS-07920 (October 2003)

------------------------------

Preparing Activity: NAVFAC

Superseding

UFGS-07920 (September 1999)

UFGS-07900A (June 1997)

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated 23 June 2005

**************************************************************************

SECTION 07920

JOINT SEALANTS

10/03

**************************************************************************

NOTE: This guide specification covers the

requirements for sealants for normal building

construction.

Comments and suggestions on this guide specification

are welcome and should be directed to the technical

proponent of the specification. A listing of

technical proponents, including their organization

designation and telephone number, is on the Internet.

Recommended changes to a UFGS should be submitted as

a Criteria Change Request (CCR).

Use of electronic communication is encouraged.

Brackets are used in the text to indicate designer

choices or locations where text must be supplied by

the designer.

**************************************************************************

NOTE: This guide specification must be carefully

modified if resealing or sealing of an addition to

an existing building is required or if conditions

require use of special sealing materials and designs

such as high-rise curtain wall systems.

**************************************************************************

NOTE: On the drawings, show:

1. Joints in which each type of sealant will be

used.

2. Typical scale or full-size details of sealant

joints, indicating joint symbol or designation.

**************************************************************************

SECTION 07920

Page 3