(UFC) 3-110-06 DESIGN: ROOFING as it relates to the
specific project and Service Exceptions indicated
therein.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7
(2002) Minimum Design Loads for Buildings
and Other Structures
ASTM INTERNATIONAL (ASTM)
ASTM C 1153
(1997; R 2003e1) Location of Wet
Insulation in Roofing Systems Using
Infrared Imaging
ASTM C 208
(1995; R 2001) Cellulosic Fiber Insulating
Board
ASTM C 728
(1997e1) Perlite Thermal Insulation Board
ASTM D 1863
(2003) Mineral Aggregate Used on Built-Up
Roofs
ASTM D 2170
(2001a) Kinematic Viscosity of Asphalts
(Bitumens)
ASTM D 2824
(2004) Aluminum-Pigmented Asphalt Roof
Coatings, Non-Fibered, Asbestos Fibered,
and Fibered without Asbestos
ASTM D 312
(2000) Asphalt Used in Roofing
ASTM D 41
(1994; R 2000e1) Asphalt Primer Used in
Roofing, Dampproofing, and Waterproofing
ASTM D 4402
(2002) Viscosity Determination of Asphalt
at Elevated Temperatures Using a
Rotational Viscometer
ASTM D 4586
(2000) Asphalt Roof Cement, Asbestos-Free
SECTION 07550
Page 5
Previous Page
