temperature.
Qualifications of Applicator
Submit evidence of the roofing system manufacturer's approval.
SD-08 Manufacturer's Instructions
**************************************************************************
NOTE: Edit the manufacturers instructions
submission requirements as necessary for the system
specified. Include bracketed requirements only as
applicable to the system being specified.
**************************************************************************
felts; G, [_____]
flashings; G, [_____]
[
modified bitumen cap sheet; G, [_____]
Base Sheet attachment, including pattern and frequency of
mechanical attachments required in field of roof, corners, and
perimeters to provide for the specified wind resistance.]
Asphalt
Primer
roof cement
Fasteners
cold weather conditions installation; G, [_____]
Include detailed application instructions and standard
manufacturer drawings altered as required by these specifications.
[Include membrane manufacturer requirements for nailers and
backnailing of roof membrane on steep slopes.] Explicitly identify
in writing, differences between manufacturer's instructions and
the specified requirements.
SD-11 Closeout Submittals
WARRANTY
INFORMATION CARD
1.4
QUALITY ASSURANCE
1.4.1
Qualifications of Applicator
The roofing system applicator shall be approved, authorized, or licensed in
writing by the roofing system manufacturer and shall have a minimum of 3
years experience as an approved, authorized, or licensed applicator with
the manufacturer and be approved at a level capable of providing the
specified warranty.
SECTION 07511
Page 9
Previous Page
