1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ALUMINUM ASSOCIATION (AA)
AA ADM1
(2000) Aluminum Design Manual
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISC 335
(1989) Structural Steel Buildings
Allowable Stress Design and Plastic Design
AMERICAN IRON AND STEEL INSTITUTE (AISI)
AISI SG-973
(1996) Cold-Formed Steel Design Manual
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7
(2002) Minimum Design Loads for Buildings
and Other Structures
ASTM INTERNATIONAL (ASTM)
ASTM A 463/A 463M
(2002a) Steel Sheet, Aluminum-Coated, by
the Hot-Dip Process
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM A 792/A 792M
(2003) Steel Sheet, 55% Aluminum-Zinc
Alloy-Coated by the Hot-Dip Process
ASTM B 209
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate
ASTM B 209M
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate (Metric)
ASTM C 1177/C 1177M
(2004e1) Glass Mat Gypsum Substrate for
Use as Sheathing
ASTM C 1289
(2003) Faced Rigid Cellular
Polyisocyanurate Thermal Insulation Board
ASTM C 518
(2004) Steady-State Thermal Transmission
Properties by Means of the Heat Flow Meter
SECTION 07416A
Page 4
Previous Page
