**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-07416A (August 2004)
---------------------------
Preparing Activity: USACE
Superseding
UFGS-07416A (November 2001)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Latest change indicated by CHG tags
**************************************************************************
SECTION 07416A
STRUCTURAL STANDING SEAM METAL ROOF (SSSMR) SYSTEM
08/04
**************************************************************************
NOTE: This guide specification covers the
requirements for both factory color and mill finish
SSSMR systems.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: This guide specification will be used in the
preparation of project specifications for SSSMR
systems. SSSMR is a system of metal roof panels
supported and/or attached by clips fastened directly
to the building structure. For non-structural
standing seam metal roof systems use Section 07412
NON-STRUCTURAL METAL ROOFING.
This guide specification will be used in conjunction
with Section 13120 PREENGINEERED METAL BUILDINGS or
Section 13121 METAL BUILDING SYSTEMS (MINOR
REQUIREMENTS), when a SSSMR is required for that
type of construction.
**************************************************************************
SECTION 07416A
Page 3
Previous Page
