and sealed by a registered structural engineer.
SD-06 Test Reports
roof assembly; G, [_____]
Factory Color Finish Performance Requirements
SD-07 Certificates
Roof Panels; G, [_____]
Certificates from the roof panel manufacturer attesting that the
panels and accessories conform to the specified requirements and
are suitable for the installation environment at the indicated
design slope.
Coil stock compatibility; G, [_____]
**************************************************************************
NOTE: When on-site roll forming is utilized,
require coil manufacturer/supplier to certify that
the coil to be used is compatible with the roll
forming machinery that will be used.
**************************************************************************
Provide certification of coil compatibility with roll forming
machinery to be used in the field.
[
Self-Adhering Modified Bitumen Underlayment
Certify underlayment compatibility with service conditions of
the roof installation.]
Qualification of Manufacturer; G, [_____]
Certify that the manufacturer of the roof membrane meets
requirements specified under paragraph entitled "Qualification of
Manufacturer."
Qualification of Applicator; G, [_____]
Certify that the applicator meets requirements specified under
paragraph entitled "Qualification of Applicator."
SD-08 Manufacturer's Instructions
INSULATION
INSTALLATION
Roof panel installation manual; G, [_____]
Submit manufacturer's printed installation manual and
instructions.
[
SD-09 Manufacturer's Field Reports
**************************************************************************
SECTION 07412
Page 10
Previous Page
