Glass mesh mortar units
SD-08 Manufacturer's Instructions
Installation
1.3
DELIVERY AND STORAGE
Deliver materials in the manufacturer's unopened bundles and containers
bearing the manufacturer's brand name. Keep materials dry, completely
covered, and protected from the weather. Store according to manufacturer's
written instructions.
1.4
WARRANTIES
1.4.1
Contractor's
Warranty
The Contractor shall warrant for 5 years that the tile roofing system, as
installed, is free from defects in workmanship. When repairs due to
defective workmanship are required during the Contractor's warranty period,
the Contractor shall make such repairs within 72 hours of notification.
performed by others will not void the warranty.
1.5
COORDINATION
Coordinate with the installation of flashing and gutters provided under
Section 07600 FLASHING AND SHEET METAL to ensure proper sequencing. Do not
install roofing materials until vent stacks and other penetrations through
roof deck have been installed.
1.6
EXTRA STOCK
Provide an extra two percent of each type and color of tile used in clean
marked containers. In the extra stock provided, include hip, ridge, and
other special shapes in the same proportion as used on the project.
PART 2
PRODUCTS
2.1
MATERIALS
**************************************************************************
NOTE: Roofing systems specified in this section
have a life expectancy in excess of 50 years.
Flashing materials should be selected with similar
life expectancy.
**************************************************************************
[2.1.1
Clay Tile
ASTM C 67, Machine formed natural clay tiles, [One Piece "S" Mission] [Two
Piece Spanish Mission consisting of a cover and pan tile] [Flat Bar Tile
with interlocking edges], kiln-fired to vitrification and free from surface
imperfections. Provide specially shaped, color-matched units as indicated
SECTION 07320N
Page 6