submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-03 Product Data
[Clay tile] [Concrete tile]
Self-adhering membrane underlayment
Glass mesh mortar units
Fiberglass-faced gypsum roof board
Submit data including tile properties , styles, and
configurations.
SD-04 Samples
Manufacturer's color charts for [Clay tile] [Concrete tile]; G
[Clay tile] [Concrete tile]; G
Submit an appropriate number of tiles to illustrate the full
range of colors and surface finish.
SD-06 Test Reports
Self-adhering membrane underlayment
SECTION 07320N
Page 5
Previous Page
