2400 mm 8 feet of valley length. [Set ridge and hip tile in a full bed of
mortar and strike mortar flush with face of cover tile.] [Apply flexible
hip and ridge flashing over ridge and hip boards and top edge of tile.
Apply asphalt plastic cement between tiles at hip and ridge.] Nail hip and
ridge tiles to hip and ridge boards.
3.3.7
CLEANING
Remove mortar and asphalt plastic cement spatter from exposed surfaces of
tiles. Upon completion of work, remove excess materials and all refuse
generated by the work of this section.
3.4
SCHEDULE
Some metric measurements in this section are based on mathematical
conversion of English unit measurement, and not on metric measurement
commonly agreed to by the manufacturers or other parties. The English and
metric units for the measurements shown are as follows:
Products
English Units
Metric Units
Nails - diameter
11 gage
2.9 mm
head diameter
3/8 inch
9.5 mm
Nails - diameter
10 gage
3.3 mm
head diameter
7/16 inch
11 mm
Wire
10 gage
3.3 mm
12 gage
2.5 mm
14 gage
1.8 mm
0.037 inch
9.4 mm
0.084 inch
2.13 mm
Edge Clips
18 gage
1.2 mm
19 gage
1.05 mm
0.042 inch
1.07 mm
1/2 inch
13 mm
Birdstop
26 gage
0.5 mm
-- End of Section --
SECTION 07320N
Page 11
Previous Page
