U.S. ARMY CORPS OF ENGINEERS (USACE)
EM 385-1-1
(2003) Safety -- Safety and Health
Requirements
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
CID A-A-1922
(Rev A; Notice 1) Shield, Expansion
(Caulking Anchors, Single Lead)
CID A-A-55614
(Basic; Notice 1) Shield, Expansion
(Non-Drilling Expansion Anchors)
CID A-A-55615
(Basic; Notice 1) Shield, Expansion (Wood
Screw and Lag Bolt Self-Threading Anchors
FS A-A-1923
(Rev A; Notice 1) Shield, Expansion (Lag,
Machine and Externally threaded Wedge Bolt
Anchors)
FS A-A-1924
(Rev A; Notice 1) Shield, Expansion (Self
Drilling Tubular Expansion Shell Bolt
Anchors)
FS A-A-1925
(Rev A; Notice 1) Shield, Expansion (Nail
Anchors)
FS A-A-60005
(Basic) Frames.Covers, Gratings, Steps,
Sump and Catch Basin, Manhole
FS RR-C-271
(Rev D; Am 1) Chains and Attachments,
Welded and Weldless
FS RR-W-410
(Rev E) Wire Rope and Strand
1.2
LUMP SUM PRICE
**************************************************************************
NOTE: If Section 01270A MEASUREMENT AND PAYMENT is
included in the project specifications, this
paragraph title (LUMP SUM PRICE) should be deleted
from this section and the remaining appropriately
edited subparagraphs below should be inserted into
Section 01270A.
**************************************************************************
1.2.1
Metalwork Fabrication, Machine Work, Miscellaneous Provisions
1.2.1.1
Payment
Payment shall constitute full compensation for furnishing all plant, labor,
materials and equipment and performing all operations necessary for the
metalwork fabrication, machine work, miscellaneous provisions as specified.
1.2.1.2
Unit of Measure
Unit of measure:
lump sum.
SECTION 05502A
Page 8
Previous Page
