submitted for approval as specified and in Section 05055A
METALWORK FABRICATION, MACHINE WORK, MISCELLANEOUS PROVISIONS.
SD-04 Samples
Miscellaneous Metals and Standard Metal Articles[; G][; G, [_____]]
Shop Fabricated Metal Items[; G][; G, [_____]]
Samples shall be submitted for approval as specified and in
Section 05055A METALWORK FABRICATION, MACHINE WORK, MISCELLANEOUS
PROVISIONS. Samples of standard or fabricated items shall be full
size and complete as required for installation in the work, and
may be installed in the work, provided each sample is clearly
identified and its location recorded.
SD-06 Test Reports
Miscellaneous Metals and Standard Metal Articles[; G][; G, [_____]]
Shop Fabricated Metal Items[; G][; G, [_____]]
Certified test reports for materials tests and analyses shall be
submitted for approval as specified and in Section 05055A
METALWORK FABRICATION, MACHINE WORK, MISCELLANEOUS PROVISIONS.
1.4
FABRICATION AND WORKMANSHIP REQUIREMENTS
Fabrication requirements and workmanship provisions for items specified in
this section shall conform with the requirements of Section 05055A
METALWORK FABRICATION, MACHINE WORK, MISCELLANEOUS PROVISIONS.
PART 2
PRODUCTS
2.1
MISCELLANEOUS METALS AND STANDARD METAL ARTICLES
Miscellaneous metal materials and standard metal articles shall conform to
the respective specifications and other designated requirements. Sizes
shall be as specified or shown. Where material requirements are not
specified, materials furnished shall be suitable for the intended use and
shall be subject to approval.
2.1.1
Structural Steel
[[ASTM A 36/A 36M] [ASTM A 572/A 572M] Grade [_____], Type [_____]] [ASTM A
588/A 588M, Grade [_____]].
2.1.2
Steel Plates
2.1.2.1
Structural
ASTM A 514/A 514M, Grade [_____].
2.1.2.2
Pressure Vessel
ASTM A 516/A 516M, Grade [_____], and shall meet the requirements of the
Charpy V-notch impact tests and the drop-weight tests as specified in ASTM
A 20/A 20M.
SECTION 05502A
Page 10
Previous Page
