ASME INTERNATIONAL (ASME)
ASME B16.3
(1998) Malleable Iron Threaded Fittings
ASME B16.5
(2003) Pipe Flanges and Flanged Fittings
ASME B16.9
(2003) Factory-Made Wrought Steel
Buttwelding Fittings
ASME B18.2.1
(1996) Square and Hex Bolts and Screws,
Inch Series
ASME B18.2.2
(1987; R 1999) Square and Hex Nuts
ASME B18.21.1
(1999) Lock Washers (Inch Series)
ASME B18.22.1
(1965; R 2003) Plain Washers
ASME B18.22M
(1981; R 2000) Metric Plain Washers
ASME B18.3
(1998) Socket Cap Shoulder and Set Screws,
Hex and Spline Keys (Inch Series)
ASME B18.6.1
(1981; R 1997) Wood Screws (Inch Series)
ASME B18.6.2
(1998) Slotted Head Cap Screws, Square
Head Set Screws, and Slotted Headless Set
Screws: Inch Series (B18.6.2)
ASME B18.6.3
(1999) Machine Screws and Machine Screw
Nuts
ASME B27.7
(1977; R 1999) General Purpose Tapered and
Reduced Cross Section Retaining Rings
ASTM INTERNATIONAL (ASTM)
ASTM A 1
(2000) Carbon Steel Tee Rails
ASTM A 109/A 109M
(2003) Steel, Strip, Carbon (0.25 Maximum
Percent), Cold-Rolled
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 148/A 148M
(2003) Steel Castings, High Strength, for
Structural Purposes
ASTM A 153/A 153M
(2004) Zinc Coating (Hot-Dip) on Iron and
Steel Hardware
ASTM A 193/A 193M
(2004c) Alloy-Steel and Stainless Steel
Bolting Materials for High-Temperature
Service
ASTM A 194/A 194M
(2004a) Carbon and Alloy Steel Nuts for
Bolts for High Pressure or High
Temperature Service or Both
SECTION 05502A
Page 4
Previous Page
