**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-03 Product Data
Concrete Mixture Proportioning[; G][; G, [_____]]
Concrete mixture proportions as determined by the Contractor and
submitted for review. The concrete mixture quantities of all
ingredients per cubic meter cubic yard and nominal maximum coarse
aggregate size that will be used in the manufacture of each
quality of concrete shall be stated. Proportions shall indicate
the mass of cement, pozzolan, ground granulated blast-furnace slag
(GGBFS) when used, and water; the mass of aggregates in a
saturated surface-dry condition; and the quantities of admixtures.
The submission shall be accompanied by test reports from a
laboratory complying with ASTM C 1077 which show that proportions
thus selected will produce concrete of the qualities indicated.
No substitution shall be made in the source or type of materials
used in the work without additional tests to show that the quality
of the new materials and concrete are satisfactory.
Batch Plant
Batch plant data to the Contracting Officer for review for
conformance with applicable specifications.
Concrete Mixers
Capacity
Concrete mixer data which include the make, type, and capacity
of concrete mixers proposed for mixing concrete in conformance
with specified requirements.
Conveying Equipment
Data on the conveying equipment and methods for transporting,
handling, and depositing the concrete.
Equipment
All placing equipment and methods shall be submitted for review
by the Contracting Officer.
Tests and Inspections
Statements that the concrete testing technicians and the
concrete inspectors meet the specified requirements.
Vertical Construction Joints[; G][; G, [_____]]
The method and equipment proposed for vertical joint cleanup and
waste disposal shall be submitted for review and approval by the
SECTION 03373
Page 7
Previous Page
