The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ACI INTERNATIONAL (ACI)
ACI 211.1
(1991; R 2002) Standard Practice for
Selecting Proportions for Normal,
Heavyweight, and Mass Concrete
ASTM INTERNATIONAL (ASTM)
ASTM C 1017/C 1017M
(2003) Chemical Admixtures for Use in
Producing Flowing Concrete
ASTM C 1064/C 1064M
(2004) Temperature of Freshly Mixed
Portland Cement Concrete
ASTM C 1077
(2003a) Laboratories Testing Concrete and
Concrete Aggregates for Use in
Construction and Criteria for Laboratory
Evaluation
ASTM C 117
(2004) Materials Finer Than 75 micrometer
(No. 200) Sieve in Mineral Aggregates by
Washing
ASTM C 123
(2004) Lightweight Particles in Aggregate
ASTM C 127
(2004) Density, Relative Density (Specific
Gravity), and Absorption of Coarse
Aggregate
ASTM C 128
(2004) Density, Relative Density (Specific
Gravity), and Absorption of Fine Aggregate
ASTM C 131
(2003) Resistance to Degradation of
Small-Size Coarse Aggregate by Abrasion
and Impact in the Los Angeles Machine
ASTM C 136
(2004) Sieve Analysis of Fine and Coarse
Aggregates
ASTM C 142
(1997; R 2004) Clay Lumps and Friable
Particles in Aggregates
ASTM C 143/C 143M
(2003) Slump of Hydraulic Cement Concrete
ASTM C 150
(2004a) Portland Cement
ASTM C 172
(2004) Sampling Freshly Mixed Concrete
ASTM C 192/C 192M
(2002) Making and Curing Concrete Test
Specimens in the Laboratory
ASTM C 231
(2004) Air Content of Freshly Mixed
Concrete by the Pressure Method
SECTION 03373
Page 4
Previous Page
