ASTM A 702
(1989; R 2000) Steel Fence Posts and
Assemblies, Hot Wrought
ASTM A 780
(2001) Repair of Damaged and Uncoated
Areas of Hot-Dipped Galvanized Coatings
ASTM A 824
(2001) Metallic-Coated Steel Marcelled
Tension Wire for Use With Chain Link Fence
ASTM C 94/C 94M
(2004a) Ready-Mixed Concrete
ASTM D 4541
(2002) Pull-Off Strength of Coatings Using
Portable Adhesion Testers
ASTM F 1043
(2004) Strength and Protective Coatings on
Metal Industrial Chain-Link Fence Framework
ASTM F 1083
(2004) Pipe, Steel, Hot-Dipped Zinc-Coated
(Galvanized) Welded, for Fence Structures
ASTM F 1184
(2003) Industrial and Commercial
Horizontal Slide Gates
ASTM F 626
(1996a; R 2003) Fence Fittings
ASTM F 668
(2004) Poly(Vinyl Chloride) (PVC) and
other Organic Polymer-Coated Steel
Chain-Link Fence Fabric
ASTM F 883
(2004) Padlocks
ASTM F 900
(2003) Industrial and Commercial Swing
Gates
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
SECTION 02821A
Page 5
Previous Page
