part of the contract drawings; the standard drawings
are available at
http://www.hnd.usace.army.mil/TECHINFO/index.htm.
Layout of fence will be shown including types and
locations of gates, and gate sizes. Drawings will
also indicate the extent of clearing required.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN WOOD-PRESERVERS' ASSOCIATION (AWPA)
AWPA C1
(2000) All Timber Products - Preservative
Treatment by Pressure Processes
AWPA C4
(1999) Poles - Preservative Treatment by
Pressure Processes
ASTM INTERNATIONAL (ASTM)
ASTM A 116
(2000) Metallic-Coated, Steel Woven Wire
Fence Fabric
ASTM A 121
(1999; R2004) Mettalic-Coated Carbon Steel
Barbed Wire
ASTM A 153/A 153M
(2004) Zinc Coating (Hot-Dip) on Iron and
Steel Hardware
ASTM A 176
(1999; R 2004) Stainless and
Heat-Resisting Chromium Steel Plate,
Sheet, and Strip
ASTM A 392
(2003) Zinc-Coated Steel Chain-Link Fence
Fabric
ASTM A 478
(1997; R 2002) Chromium-Nickel Stainless
Steel Weaving and Knitting Wire
ASTM A 491
(2003) Aluminum-Coated Steel Chain-Link
Fence Fabric
ASTM A 666
(2003) Annealed or Cold-Worked Austenitic
Stainless Steel Sheet, Strip, Plate, and
Flat Bar
SECTION 02821A
Page 4
Previous Page
