Removal of raised or recessed markers or reflectors
is not covered in this section.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS
(AASHTO)
AASHTO M 247
(2002) Glass Beads Used in Traffic Paints
ASTM INTERNATIONAL (ASTM)
ASTM D 4280
(2004) Extended Life Type, Nonplowable,
Raised, Retroreflective Pavement Markers
ASTM D 4505
(2001a) Preformed Retroflective Pavement
Marking Tape for Extended Service Life
ASTM D 792
(2000) Density and Specific Gravity
(Relative Density) of Plastics by
Displacement
ASTM E 28
(2004) Softening Point of Resins Derived
from Naval Stores by Ring and Ball
Apparatus
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
FS TT-B-1325
(Rev C) Beads (Glass Spheres)
Retro-Reflective (Metric)
FS TT-P-1952
(Rev D) Paint, Traffic and Airfield
Markings, Waterborne
1.2
UNIT PRICES
**************************************************************************
NOTE: This paragraph should be deleted when
pavement marking is included in a lump sum project.
**************************************************************************
SECTION 02763A
Page 4
Previous Page
