**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-02763A (February 2004)
---------------------------
Preparing Activity: USACE
Superseding
UFGS-02763A (April 2001)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Latest change indicated by CHG tags
**************************************************************************
SECTION 02763A
PAVEMENT MARKINGS
02/04
**************************************************************************
NOTE: This guide specification covers the
requirements for marking and remarking airport and
heliport pavements primarily, but may also be used
for marking roads, streets and parking areas; this
section also includes removal of paint or tape
markings from pavement surfaces.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
This guide specification includes tailoring options
for preformed tape and thermosetting plastic
compounds. Selection or deselection of a tailoring
option will include or exclude that option in the
section, but editing the resulting section to fit
the project is still required.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: Pavement markings are usually removed by
water blasting; few chemical methods are effective.
Sand or shotblasting may be prohibited by local air
pollution regulations. Drawings will show the
extent of pavement to have markings removed.
SECTION 02763A
Page 3
Previous Page
