(Triangular Specimens)
ASTM D 1557
(2002e1) Laboratory Compaction
Characteristics of Soil Using Modified
Effort (56,000 ft-lbf/cu. ft. (2,700
kN-m/cu.m.))
ASTM D 1751
(1999) Preformed Expansion Joint Filler
for Concrete Paving and Structural
Construction (Nonextruding and Resilient
Bituminous Types)
ASTM D 1752
(2004a) Preformed Sponge Rubber and Cork
Expansion Joint Fillers for Concrete
Paving and Structural Construction
ASTM D 1784
(2003) Rigid Poly(Vinyl Chloride) (PVC)
Compounds and Chlorinated Poly(Vinyl
Chloride) (CPVC) Compounds
ASTM D 2167
(1994; R 2001) Density and Unit Weight of
Soil in Place by the Rubber Balloon Method
ASTM D 2321
(2000) Underground Installation of
Thermoplastic Pipe for Sewers and Other
Gravity-Flow Applications
ASTM D 2729
(2003) Poly(Vinyl Chloride) (PVC) Sewer
Pipe and Fittings
ASTM D 2922
(2004) Density of Soil and Soil-Aggregate
in Place by Nuclear Methods (Shallow Depth)
ASTM D 3017
(2004) Water Content of Soil and Rock in
Place by Nuclear Methods (Shallow Depth)
ASTM D 3034
(2004) Type PSM Poly(Vinyl Chloride) (PVC)
Sewer Pipe and Fittings
ASTM D 3212
(1996a; R 2003) Joints for Drain and Sewer
Plastic Pipes Using Flexible Elastomeric
Seals
ASTM D 3350
(2002a) Polyethylene Plastics Pipe and
Fittings Materials
ASTM F 1417
(1992; R 1998) Installation Acceptance of
Plastic Gravity Sewer Lines Using
Low-Pressure Air
ASTM F 477
(2002e1) Elastomeric Seals (Gaskets) for
Joining Plastic Pipe
ASTM F 679
(2003) Poly(Vinyl Chloride) (PVC)
Large-Diameter Plastic Gravity Sewer Pipe
and Fittings
ASTM F 714
(2003) Polyethylene (PE) Plastic Pipe
(SDR-PR) Based on Outside Diameter
SECTION 02630
Page 9
Previous Page
