**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-02630 (July 2003)
----------------------------
Preparing Activity: USACE
Superseding
UFGS-02630A (March 2000)
UFGS-02630N (September 1999)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 02630
07/03
**************************************************************************
NOTE: This guide specification covers the
concrete, clay, steel, ductile iron, aluminum,
polyvinyl chloride (PVC), and polyethylene (PE) pipe.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: On the project drawing, show:
1. Plan and location of all new pipelines,
including type of service and size of pipe.
2. Location, size, and type of service of existing
connecting, intersecting, or adjacent pipelines and
other utilities.
3. Paved areas and railroads which pass over new
pipelines.
4. Profile, where necessary to show unusual
conditions.
SECTION 02630
Page 4