and guides, and layout and anchorage of equipment and appurtenances in
valve manholes, and equipment relationship to other parts of the work
including clearances for maintenance and operation.
1.3.2
Insulated Sections
The Contractor shall submit sample sections for insulation of pipe, elbow,
tee, valve, support point, and terminating points. After approval of
materials and prior to insulation of piping, a display shall be prepared of
insulated sections showing compliance with specifications including showing
fastening, sealing, jacketing, straps, waterproofing, supports, hangers,
anchors, and saddles. Approved display sample sections shall remain on
display at the jobsite during the construction period until no longer
needed by Contracting Officer, then removed.
1.4
DELIVERY AND STORAGE
All materials and equipment delivered and placed in storage shall be stored
with protection from the weather, excessive humidity, and excessive
temperature variation; dirt, dust, or other contaminants.
1.5
FIELD MEASUREMENTS
The Contractor shall become familiar with all details of the work, verify
all dimensions in the field, and shall advise the Contracting Officer of
any discrepancy before performing the work.
PART 2
PRODUCTS
2.1
STANDARD PRODUCTS
Materials and equipment shall be the standard products of a manufacturer
regularly engaged in the manufacture of such products and shall essentially
duplicate items that have been in satisfactory use for at least 2 years
prior to bid opening. Equipment shall be supported by a service
organization that is, in the opinion of the Contracting Officer, reasonably
convenient to the site.
2.2
NAMEPLATES
Each major item of equipment such as sump pump, motor, steam trap, and
pressure reducing valve shall have the manufacturer's name, address, type
or style, model or serial number, and catalog number on a plate secured to
the item of equipment.
2.3
ASBESTOS PROHIBITION
Asbestos and asbestos-containing products shall not be used.
2.4
ELECTRICAL WORK
Motors, manual or automatic motor control equipment, and protective or
signal devices required for the operation specified shall be provided under
this section in accordance with NFPA 70 and Section [16375A ELECTRICAL
DISTRIBUTION SYSTEM, UNDERGROUND] [16302N UNDERGROUND TRANSMISSION AND
DISTRIBUTION].
SECTION 02560
Page 10
Previous Page
