vented, (10) sump pump piping details, (11) valve
manhole equipment dimensions and details, (12) sump
pump capacity, (13) electrical wiring details for
the equipment (dedicated service for sump pump),
(14) steam drip trap locations with access and
capacities, (15) steam main drip leg sizes.
This guide specification is to be included as a part
of a contract which includes Sections 02555A
PREFABRICATED UNDERGROUND HEATING/COOLING
DISTRIBUTION SYSTEM or 02555N EXTERIOR FUEL
DISTRIBUTION; 02546 PRE-ENGINEERED UNDERGROUND HEAT
DISTRIBUTION SYSTEM or 02552N EXTERIOR SHALLOW
TRENCH STEAM DISTRIBUTION; 02553A HEAT DISTRIBUTION
SYSTEMS IN CONCRETE TRENCHES or 02553N EXTERIOR
UNDERGROUND STEAM DISTRIBUTION SYSTEM. Include the
following Sections as part of this contract: 02300
EARTHWORK or 02300 EARTHWORK; 16370A ELECTRICAL
DISTRIBUTION SYSTEM, AERIAL or 16301N OVERHEAD
TRANSMISSION AND DISTRIBUTION; 16375A ELECTRICAL
DISTRIBUTION SYSTEM, UNDERGROUND or 16302N
UNDERGROUND TRANSMISSION AND DISTRIBUTION; 03150A
EXPANSION JOINTS, CONTRACTION JOINTS, AND
WATERSTOPS; Section [03300A CAST-IN-PLACE STRUCTURAL
CONCRETE][03300N CAST-IN-PLACE CONCRETE]; 05090A
WELDING, STRUCTURAL; 05500A MISCELLANEOUS METAL or
05500N METAL FABRICATIONS; 07131 ELASTOMERIC SHEET
WATERPROOFING; 09900 PAINTS AND COATINGS; 05093 or
15216N WELDING PRESSURE PIPING; 16415A ELECTRICAL
WORK, INTERIOR or 16510N INTERIOR LIGHTING; and
others as applicable to the project.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI H35.1
(2003) Alloy and Temper Designation
Systems for Aluminum
ASME INTERNATIONAL (ASME)
ASME B1.20.1
(1983; R 2001) Pipe Threads, General
Purpose, Inch
ASME B16.11
(2002) Forged Fittings, Socket-Welding and
SECTION 02560
Page 5
Previous Page
