Section VIII, Pressure Vessels Division 1
- Basic Coverage
ASTM INTERNATIONAL (ASTM)
ASTM A 181/A 181M
(2001) Carbon Steel Forgings, for
General-Purpose Piping
ASTM A 53/A 53M
(2004a) Pipe, Steel, Black and Hot-Dipped,
Zinc-Coated, Welded and Seamless
ASTM D 2513
(2004a) Thermoplastic Gas Pressure Pipe,
Tubing, and Fittings
ASTM D 2517
(2000e1) Reinforced Epoxy Resin Gas
Pressure Pipe and Fittings
ASTM D 2683
(2004) Socket-Type Polyethylene Fittings
for Outside Diameter-Controlled
Polyethylene Pipe and Tubing
ASTM D 3261
(2003) Butt Heat Fusion Polyethylene (PE)
Plastic Fittings for Polyethylene (PE)
Plastic Pipe and Tubing
ASTM D 3308
(2001) PTFE Resin Skived Tape
ASTM D 3350
(2002a) Polyethylene Plastics Pipe and
Fittings Materials
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-25
(1998) Standard Marking System for Valves,
Fittings, Flanges and Unions
MASTER PAINTERS INSTITUTE (MPI)
MPI 9
(Jan 2004) Exterior Alkyd, Gloss, MPI
Gloss Level 6
NACE INTERNATIONAL (NACE)
NACE RP0185
(1996) Extruded, Polyolefin Resin Coating
Systems with Soft Adhesives for
Underground or Submerged Pipe
NACE RP0274
(2004) High Voltage Electrical Inspection
of Pipeline Coatings
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 58
(2004) Liquefied Petroleum Gas Code
THE SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SSPC Paint 25
(1997; R 2000) Zinc Oxide, Alkyd, Linseed
Oil Primer for Use Over Hand Cleaned
Steel, Type I and Type II
SECTION 02556A
Page 5
Previous Page
