**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN GAS ASSOCIATION (AGA)
AGA B109.2
(2000)Diaphragm-Type Gas Displacement
Meters (500 cubic ft./hour Capacity and
Over)
AGA XR0104
(2001) AGA Plastic Pipe Manual for Gas
Service
AMERICAN PETROLEUM INSTITUTE (API)
API Spec 5L
(2004) Line Pipe
API Spec 6D
(2002) Specification for Pipeline Valves
ASME INTERNATIONAL (ASME)
ASME B1.20.1
(1983; R 2001) Pipe Threads, General
Purpose, Inch
ASME B16.11
(2002) Forged Fittings, Socket-Welding and
Threaded
ASME B16.21
(1992) Nonmetallic Flat Gaskets for Pipe
Flanges
ASME B16.34
(1996) Valves Flanged, Threaded, and
Welding End
ASME B16.40
(2002) Manually Operated Thermoplastic Gas
Shutoffs and Valves in Gas Distribution
Systems
ASME B16.5
(2003) Pipe Flanges and Flanged Fittings
ASME B16.9
(2003) Factory-Made Wrought Steel
Buttwelding Fittings
ASME B31.8
(2003) Gas Transmission and Distribution
Piping Systems
ASME BPVC SEC VIII D1
(2001) Boiler and Pressure Vessel Code;
SECTION 02556A
Page 4