6.
Limits of bentonite seal and grout seal
7. Type of cap, cover, or seal required at top of
well.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM A 312/A 312M
(2004b) Seamless and Welded Austenitic
Stainless Steel Pipes
ASTM A 53
(1999b) Pipe, Steel, Black and Hot-Dipped,
Zinc-Coated, Welded and Seamless
ASTM C 117
(2004) Materials Finer Than 75 micrometer
(No. 200) Sieve in Mineral Aggregates by
Washing
ASTM C 136
(2004) Sieve Analysis of Fine and Coarse
Aggregates
ASTM C 150
(2004a) Portland Cement
ASTM D 1586
(1999) Penetration Test and Split-Barrel
Sampling of Soils
ASTM D 1587
(2000) Thin-Walled Tube Sampling of Soils
for Geotechnical Purposes
ASTM D 1785
(2004a) Poly(Vinyl Chloride)(PVC) Plastic
Pipe, Schedules 40, 80, and 120
ASTM D 2487
(2000) Soils for Engineering Purposes
(Unified Soil Classification System)
ASTM D 2488
(2000) Description and Identification of
Soils (Visual-Manual Procedure)
ASTM D 4397
(2002) Polyethylene Sheeting for
Construction, Industrial, and Agricultural
Applications
SECTION 02525N
Page 4
Previous Page
