1.2.1.2
Measurement
Drilling Holes in soil will be measured for payment to the nearest 300 mm
foot, based upon the meters linear feet of hole actually drilled in soil in
accordance with the specifications.
1.2.1.3
Unit of Measure
Unit of measure:
meter linear foot.
1.2.2
Drilling Holes in Rock
**************************************************************************
NOTE: This payment item will be used only when a
prescriptive specification is desired. It will be
deleted when a performance specification is desired.
**************************************************************************
1.2.2.1
Payment
Payment will be made for costs associated with Drilling Holes in Rock.
1.2.2.2
Measurement
Drilling Holes in Rock will be measured for payment to the nearest 300 mm
foot, based upon the meters linear feet of hole actually drilled in rock in
accordance with the specifications.
1.2.2.3
Unit of Measure
Unit of measure:
meter linear foot.
1.2.3
[Soil] [Rock] Anchors
**************************************************************************
NOTE: This payment item will be used only when a
prescriptive specification is desired. It will be
deleted when a performance specification is desired.
**************************************************************************
1.2.3.1
Payment
Payment will be made for costs associated with furnishing and installing
[Soil] [Rock] Anchors. No payment will be made for anchors which do not
meet the acceptance criteria.
1.2.3.2
Measurement
[Soil] [Rock] Anchors will be measured for payment to the nearest 300 mm
foot, based upon the meters linear feet of anchor actually installed below
the bearing plate in accordance with the specifications.
1.2.3.3
Unit of Measure
Unit of measure:
meter linear foot.
SECTION 02490
Page 10
Previous Page
